CONCRETE REPAIR

HS 30 – HIGH STRENGTH CONCRETE REPAIR

Auscon HS 30 High Strength Concrete Repair is designed for patching Post Tensioning pockets and Pans and for all general floor and wall concrete patching repairs. HS 30 is formulated with new generation anti- efflorescence and anti-corrosion polymers to reduce efflorescence and moisture absorption. This inhibits corrosion of Post Tensioning components and reinforcing steel.

Minimum MPa
MPa @ 7 days
Water / 20kg
Application Thickness
Trowelable 25 4.0 litres 10 – 80 mm

RS 25 – RAPID SET POCKET & PAN FILL

Auscon RS 25 Rapid Set High Strength Sand & Cement is designed for patching of Post Tensioning pockets, and for general floor and wall concrete repairs. RS 25 is formulated with new generation anti -efflorescence and anti-corrosion polymers to reduce efflorescence and moisture absorption. This inhibits corrosion of Post Tensioning components and reinforcing steel. Firms in 30 minutes approximately.
Minimum MPa
MPa @ 24 hrs
Water / 20kg
Application Thickness
Trowelable 20 4.0 litres 10 – 80 mm

HB 40 – HIGH BUILD CONCRETE WALL REPAIR

Auscon HB 40 High Build Concrete Wall Repair is a trowelable, easy to apply product that is suitable for high build concrete patching. It incorporates advanced additives and has high durability. Requiring only the addition of water, and when cured, it is designed to provide compatible strength and elastic modulus for a range of concrete and masonry repair applications.

Minimum MPa
MPa @ 24 hrs
Water / 20kg
Application Thickness
Trowelable 15 2.6 litres 10 – 60 mm

FC 5 – FEATHER PATCH CONCRETE REPAIR

Auscon FC 5 Feather Patch is a state-of-the-art concrete wall repair, designed for the most challenging repair applications. FC 5 is a durable and chemically advanced concrete repair. It has ultra-low shrinkage, is free of chloride and aluminium, and only requires the addition of water to form a concrete skim patching repair.

SS 50 – SUPER-STICK SHOTCRETE

SS 50 Super stick Shotcrete is a blended cement mix that is sprayed at high velocity onto a surface. It is possible to place the Auscon shotcrete using the dry-mix process, where most of the mixing water is added in close vicinity to the nozzle or the wet-mix method where all the ingredients, including water are mixed before introduction into the hose. Auscon SS 50 is specifically designed for either dry-mix or wet-mix shotcrete process.